2016 Freightliner M2 106 4×4 Altec Rear Mount Elevator Flatbed Bucket Truck

2016-Freightliner-M2-106-4x4-Altec-Rear-Mount-75'-Elevator-Cummins-Terex-Bucket-Utility-Line-Clearing-Boom-Man-Lift-Truck

2016 Freightliner M2 106 4×4 Altec 75′ Rear Mount Elevator Flatbed Bucket Truck
2016 Freightliner M2 106
Cummins 6.7l Turbo Diesel
Eaton 6 Speed Transmission
-New Clutch
Odometer reads: 33,790 Miles
4×4
WB: 176”
GVWR: 33,000lbs
Air Brakes
Driver/Passenger Bench Seat
A/C + Heat
AM/FM Radio
Cab Cage Protector
Front Bumper 20klb Winch
Utility Bed w/ Storage Boxes
Good Tires all around!
Equipped with the following:
Altec LR760-E70
70’ Platform Height / 75’ Working Height
-Rear Mounted Boom
Single Man Bucket
-Rated for 400lbs
2x Hydraulic Tool Circuit at platform
Boom is insulated for 46kv
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically Tested!
Truck was Serviced, Greased, and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2016+ INQUIRE FOR MORE DETAILS

CHECK OUT OUR FULL WALK AROUND AND OPERATION VIDEO OF THIS TRUCK BELOW

2024 NIFTYLIFT SD50DE Hybrid 4×4 BOOM MAN LIFT

2024-Niftylift-SD50DE-Diesel-4x4-Boom-Man-Lift

2024 NIFTYLIFT SD50DE Hybrid 4×4 BOOM MAN LIFT

Bi-Energy (Kubota Diesel & DC Electric Battery)

49′ 6” Platform Height / 56’ Work Height / 28’ 6” Horizontal Reach

Hydraulic Outriggers/Stabilizers

4×4

Electric Power to the Platform

Working Width: 14’ 5”

Basket Width: 3’ 7”

Minimum Weight: 5,950lbs

Overall Dimensions: (LxWxH) 18’4″x5’3″x7′3″

*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*

SEE  ATTACHED SPEC SHEET IN PHOTOS!

Optional Upgrades:

  1. A) WATER Line to Platform
  2. B) AIR Line to Platform

NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!

2019 NIFTYLIFT SD50D 4×4 MAN BOOM LIFT

2019-Niftylift-SD50D-Boom-Man-Lift-4x4

2019 NIFTYLIFT SD50D 4×4 56’ MAN BOOM LIFT
2019 NIFTYLIFT SD50D
Powered by: Kubota Diesel
Hours: 388
49′ 6” Platform Height / 56’ Work Height / 28’ 6” Horizontal Reach
Hydraulic Outriggers/Stabilizers
4×4
Width: 5’ 3”
Working Width: 14’ 5”
Basket Width: 3’ 7”
Minimum Weight: 5,950lbs
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!

2018 Freightliner M2 106 Altec Digger Derrick Truck

2018-Freightliner-M2-Altec-Digger-Derrick-Utility-Lineman-Bucket-Powerline-Truck

2018 Freightliner M2 106 Altec Digger Derrick Truck
2018 Freightliner M2 106
6.7L Cummins Turbo Diesel
Odometer reads: 59,012 Miles
Allison Automatic Transmission
4×2
-Exhaust Brake
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Bench Seat
A/C and Heat
AM/FM Radio
Total Bed Length: 15’ Utility Storage Bed (11′ Flat Deck)
Utility Storage Bed Compartments
Good Tires all around
Equipped with the following:
Altec DC47TR Digger Derrick Unit
-Sheave Height: 47’
-Max Lifting Capacity: 23,790lbs
– 3 Sheaves
-Ride on Operating Station
-Rear Winch
-18” Auger Included
Pole Grabs
4 Outriggers
Rear Hydraulic Tool Hose Line Reel
Insulated and rated for 46kv
Altec Boom will come ANSI/Dielectrically Tested before sold!
Truck will come Serviced, Greased, and Vehicle Inspected before sold!

WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!

2015 Freightliner M2 106 4×4 Terex Rear Mount Elevator Flatbed Bucket Truck

2015-Freightliner-M2-106-4x4-Terex-Rear-Mount-75'-Elevator-Cummins-Altec-Bucket-Utility-Line-Clearing-Boom-Man-Lift-Truck

2015 Freightliner M2 106 4×4 Terex Rear Mount Elevator Flatbed Bucket Truck

2015 Freightliner M2 106

Cummins 6.7l Turbo Diesel

Eaton 6 Speed Transmission

Odometer reads: 95,219 Miles

4×4

WB: 177”

GVWR: 33,000lbs

Locking Differential

Air Brakes

Driver/Passenger Bench Seat

A/C + Heat

AM/FM Radio

Cab Cage Protector

Front Bumper 20klb Winch

14′ 3″Utility Bed w/ Storage Boxes (5′ Center Useable Section)

Good Tires all around!

Equipped with the following:

Terex HI-Ranger 60-70

70’ Platform Height / 75’ Working Height

-Rear Mounted Boom

Single Man Bucket

-Rated for 350lbs

2x Hydraulic Tool Circuit at platform

Boom is insulated for 46kv

Continuous Rotation

4 Outriggers

Upper and Lower Controls

-Lever Lower Controls

-Pistol Grip Upper Controls

Emergency Stop Valve at All Upper and Lower Control Station

Terex Boom will come ANSI/Dielectrically Tested!

Truck will be sold Serviced, Greased, and Vehicle Inspected!

2018 International 4300 Altec Material Handler Bucket Truck

2018-International-4300-Altec-60'-Material-Handler-Bucket-Truck

2018 International 4300 Altec Material Handler Bucket Truck

2018 International 4300

Cummins 6.7L Turbo Diesel

Allison Automatic Transmission

Odometer Reads: 64,537 Miles

4×2

WB: 193”

GVWR: 33,000lbs

Air Brakes

Trailer Air Hook Up

Pintle Hitch

Bench Seat

A/C + Heat

AM/FM Radio

14′ Utility Service Bed w/ Storage Compartments

Strobe Lights

Good Tires all around!

Equipped with the following:

Rear Capstan Winch

Altec AM55-MH Boom

55’ Platform Height / 60’ Working Height

-Rear Mounted Boom

Two Man Bucket

-Rated for 600lbs

Hydraulic Tool Circuit at platform

Material Handling System

-Rated for 2,000lbs

Boom is insulated for 46kv

Hydraulic Platform Rotation/Tilt

Continuous Rotation

4 Outriggers

Upper and Lower Controls

-Lever Lower Controls

-Pistol Grip Upper Controls

Emergency Stop Valve at All Upper and Lower Control Station

Altec Boom was ANSI/Dielectrically tested!

Truck was Serviced, Greased and Vehicle Inspected!

WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!

2024 NIFTYLIFT TM42TE TOWABLE BOOM MAN LIFT

2024-Niftylift-TM42TE-TM34TGE-TM42TG-Tow-Behind-Boom-Man-Lift

Powered by: DC Electric Motor (Batteries)

42′ Platform Height / 48′6” Work Height / 25’ Horizontal Reach

Hydraulic Outriggers/Stabilizers

Electric Power to the Platform

Working Width: 12’ 6”

Basket Width: 4’ 7”

Minimum Weight: 3,990lbs

Overall Dimensions: (LxWxH) 18’3″x5’3″x6′7″

*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*

SEE  ATTACHED SPEC SHEET IN PHOTOS!

Optional Upgrades:

  1. A) Traction Drive/2WD Assist
  2. B) AIR to Platform
  3. C) WATER to Platform

NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!

2017 Freightliner M2 106 Altec Material Handler Bucket Truck

2017-Freight-M2-106-Altec-AA55-Material-Handler-Bucket-Truck

2017 Freightliner M2 106 Altec Material Handler Bucket Truck
2017 Freightliner M2 106
6.7L Cummins Turbo Diesel
Allison Automatic Transmission
Odometer reads: 66,505 Miles
4×2
– Exhaust Brake
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AN55E Boom
55’ Platform Height / 60’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!

2019 International 4300 Altec Material Handler Bucket Truck

2019-International-4300-Altec-Material-Handler-Utility-Bucket-lineman-Cherry-Picker-Truck

2019 International 4300 Altec Material Handler Bucket Truck
2019 International 4300
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 73,536 Miles
4×2
WB: 193”
GVWR: 33,000lbs
Locking Diff
Air Brakes
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!

CHECK OUT OUR FULL WALK AROUND AND OPERATION VIDEO OF THIS TRUCK BELOW!

2024 Manitou MT 733 Easy 75D Comfort Enclosed Telehandler Fork Truck

2024-Manitou-MT-733-Easy-75D-Comfort-Enclosed-Telehandler-Fork-Truck

2024 Manitou MT 733 Easy 75D Comfort Enclosed Telehandler Fork Truck

2024 Manitou MT 625 ST

Powered by: Deutz TD 3.6L Turbo Diesel

75hp/240lb torque

Hour Meter Reads: 4.3

Hydrostatic Transmission

-Number of Gears: (4 Forward / 4 Reverse)

4WD

3-way steering (Crab Steer, front steer, side walk steer)

Max Lift Capacity: 7,275 lbs

Max Lift Height: 22′ 6″

Max Outreach: 12′ 8″

Breakout Force: 12,971 LB Force (Can be used as a loader)

Operating Weight: 15,100 lbs

Unit is being sold with 46“ Forks and a 42“ Powershift Mast

(Many other attachments offered! We can get you any attachment you’d like!)

Hydraulic QD

Aux Hydraulic Ports at the tip of boom

Comfort Ride Control

Working Lights

Enclosed Cab

Heat + AC

Alliance Tubeless Tough Trac 400/80-24 Tires

Telematics easy link connection (Gives you locations/service intervals/info about the machine anywhere in the world!)

Overall Dimensions: 16’2”x7’7”x7’9” (Length to face of Mast)

Machine comes with factory 2,000 Hour/2 Year Warranty(Whichever comes first)! We offer extended warranty plans!