2004 Thawzall H150 Heatzone Ground Heater W/ Generator

2004-THAWZALL-H150-HEATZONE-GROUND-HEATER W/-GENERATOR-Concrete-Curing-Ground-Thawing-Excavation-Work

2004 Thawzall H150 Heatzone Ground Heater W/ Generator

2004 Thawzall H150

Kubota Diesel Engine Powered/Genset

Hour Meter Reads: 12,414 Hours

150k BTU Heater

THAW frozen ground sq ft 1,200 – 2,400

CURE concrete sq ft 2,400 with accessories sq ft 6,000 max

FROST prevention sq ft 2,400 with accessories sq ft 10,800 max

HEAT buildings

Operating Range °F 180

Operating Pressure psi 1-5

Fuel Consumption (max) gph 1.0

Run Time days 4+

Pump Capacity gpm/gph 30/1800

DIMENSIONS & CAPACITIES:

L x W x H 161″ x 174″ x 79″

Weight w/fuel & fluid lbs 3,460

Fuel Capacity:102 Gallons

HTF (Heat Transfer Fluid) 56 Gallons

MISC. SPECIFICATIONS:

One – 1/2 hp Pump Closed Loop

Centrifugal Hose Length (2 zones x 600’) ft 1,200

Electrical, GFI 1) 20 amp x 120 vac

HTF Pumpability °F -80

Fuel Winter blend diesel or #1 fuel oil

2” Ball Hitch

Unit has been serviced and greased!

2020 Wacker Neuson E3000 Ground Heater w/ Generator

2020-Wacker-Neuson-E3000-Ground-Curing-Construction-Heating-Concrete-Curing-Ground-Heater-Generator

2020 Wacker Neuson E3000 Ground Heater w/ Generator

2020 Wacker Neuson E3000

Hours:1,083.2

Diesel Fired

385,000 BTU’s

2” Ball

Onboard 6Kw Kohler Diesel Generator

-Hours: 1,109.5

-Fully enclosed

-Powers machine to make it useable on any jobsite

Dual rear hose set up

One pump per hose loop means delivery of maximum Btu’s per hour.

Engineered for reliable performance and trouble-free starts

up to 140 hours of run time

the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.

The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.

With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.

Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.

Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.

Unit is fully functional and has just been serviced!