2008 Vermeer BC1000XL 12″ Wood Chipper
2008 Vermeer BC1000XL
Powered by Cummins 3.3L Turbo Diesel
Hour meter reads: 1,757
12” Chipping Capacity!
Drum Chipper
Pintle Hitch
Good Tires!
Just Serviced and Ready to Work!
2013 International 4300 Altec Material Handler Bucket Truck
2013 International 4300
MaxxforceDT Turbo Diesel
-Just received a full works kit overhaul, 6x New Injectors, Cam Shaft and many new parts!
Allison Automatic Transmission
Odometer reads: 79,107 Miles
Run Time Hours: 3,528
PTO Hours: 594
4×2
A/C and Heat
AM/FM Radio
Bench Seat
Air Brakes
Trailer Air Hook Up
Pintle Hitch
33,000 GVWR
Utility Bed Storage Compartments
Good tires all around!
Equipped with the following:
Altec AM55 Boom
55’ Platform Height/ 60’ Working Height
-Rear Mounted Boom
-Over Center Boom
Two Man Bucket
-Rated for 600lbs
Hydraulic Platform Tilt
Hydraulic Rotation Bucket
Two sets of Hydraulic Tool Circuits at platform
Material Handling System with Manual Extendable Jib
-Rated for 2,000lbs
Boom is insulated for 46kv
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Automatic Upper Boom Stow System
Boom was just ANSI/Dielectrically Tested and passed for a whole new year!
Truck was just Serviced, Greased and Inspected!
2010 MAC 800G Indirect Fired Enclosed Self-Contained Mobile Construction Heater
2010 MAC 800G
Powered by Kubota Diesel
Diesel Fired
Hours: 9,014
800,000 BTU
2x 11” Outlet
2x 11″ Ducting included
Self-Contained and fully enclosed
IDF Heater (Indirect Fired Heater)
Air output volume: 3,900 Cubic Ft per minute
Unit is fully function and ready to go to work!
2014 International 4300 Utility Mechanic Service Truck
2014 International 4300
MaxxforceDT Turbo Diesel
-260HP
Eaton 6 Speed Transmission
Odometer reads: 269,782 Miles
4×2
Locking Diff
A/C and Heat
AM/FM
Air Brakes
32,000 GVWR
Air Ride Driver Seat
Enclosed Bed
Good Tires all around
Equipped with the following
– Utility Bed w/ Storage Compartments
– Auto Crane 3203H Crane – S/N: 3203H-1013-026
– 3,200lb Lifting Capacity
– Lifting Height (from base of crane): 16′
– Total Lifting Height : 22′
– Three Sheaves (2x Hydraulic/1x Manual)
– Hard Wire Remote Control Operated
– VanAir RC40 Hydraulic Air Compressor – 40CFM
– Rear Air Line Reel
– Working lights/Strobe Lights
Just Serviced and Ready to work!
2012 International 7500 Palfinger 15 Ton PK40002EH Knuckle Boom Crane Truck
2012 International 7500
Maxxforce11 Turbo Diesel
-370hp
Odometer reads: 150,966 Miles
PTO Hours: 2,628
8 LOLO Transmission
A/C and Heat
AM/FM Radio
Air Brakes
66,000 GVWR
Air Ride Driver Seat
24’ 6” Flatbed
Tandem Axle w/ Tri Drop Axle
Good Tires all around
Equipped with the following:
-Palfinger PK40002-EH Knuckle Boom Crane
-29,600lb Lifting Capacity
-Crane Boom Height: 82’ 8”
-Crane Side Reach: 68’ 11”
-4x Out riggers
-Wireless Remote Control
Truck was just serviced, greased, vehicle inspected, and boom inspected!
2008 International 7400 National 10 Ton 400B Crane Truck
2008 International 7400
MaxxforceDT Turbo Diesel
Odometer reads: 198,445 Miles
PTO Hours: 2,897
8 LOLO Transmission
A/C and Heat
AM/FM Radio
Exhaust Brake
Air Brakes
60,000 GVWR
Air Ride Driver Seat
12’ Flatbed
Tandem Axle
Good Tires all around
Equipped with the following:
-National 400B Crane
-20,000lb Lifting capacity
-3 Sheaves
-Crane Boom Height: 46’
-Crane Tip Height: 55’
– 4x Outriggers
-2X Working Stations to operate the boom from
-6’ Pin on 2 Man Basket Included (Rated for 1,200lbs)
Truck was just serviced, greased and vehicle inspected!
2011 International 4300 Altec DM47 Digger Derrick Truck
2011 International 4300
MaxxforceDT Turbo Diesel
Odometer reads: 38,536 Miles
PTO Hours: 303
Eaton 6 Speed Transmission
-New transmission with 1 year parts warranty
4×2
WB: 189”
A/C and Heat
AM/FM Radio
33,000# GVWR
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Bench Seat
Good Tires all around
Equipped with the following:
Altec DM47TR Digger Derrick Unit
-Sheave Height: 47’
-Max Lifting Capacity: 25,085lbs
– 3 Sheaves
-Ride On Console
-Heel Winch
-18” Auger Included
-Upper controls at tip of boom to operate the unit (Pin on bucket not included)
Truck will come serviced, greased and vehicle inspected before sold!
2013 Ford F750 UNDER CDL Utility Mechanic Service Truck
2013 Ford F750
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer reads: 221,932 Miles
4X2
WB: 158”
A/C and Heat
AM/FM Radio
Air Brakes
25,999# GVWR
Bench Seat
Power Windows
Power Locks
Good Tires all around
Equipped with the following:
-Maintainer Utility Storage Compartments
-w/ Tool Drawers
Maintainer H10025TT Series Crane S/N#: EE331
-10,000lb Lifting Capacity
-26’ Sheave Height
-3 Sheaves (2x Hydraulic)
-Wireless Remote
-2x Downriggers
Van Air RC40 Hydraulic Screw Compressor S/N#: 30-89724
-40CFM
-Max PSI: 150psi
-Rear Air Line out back of utility body
Truck will come serviced, greased and vehicle inspected before sold!
2005 Peterbilt 378 Manitex 30 Ton 30102C Crane Truck
2005 Peterbilt 378
Cat C13 Turbo Diesel
Odometer reads: 51,447 Miles
8 LOLO Transmission
-Brand New Transmission with a one year warranty
A/C and Heat
AM/FM Radio
Engine Brake
Rear Diff. Lock
Dual Stainless Steel Fuel Tanks
Air Brakes
60,000 GVWR
Air Ride Driver Seat
22’ Flatbed
-One small broken board in rear of bed (See photo)
Tandem Axle
BRAND NEW TIRES ALL THE WAY AROUND THE TRUCK!
Equipped with the following:
-Manitex 30102 Crane
-30 Ton Lifting Capacity
-4 Sheaves
-102’ Proportional Main Boom w/ 157’ Max Tip Height when using the Jib
-2 Stage Jib Included
-4x Outriggers w/ 1X Front Bumper Down Rigger
-2X Working Stations to operate the boom from
-Crane Smart LMI System
Truck is from the south and is very clean!
Crane was just Inspected and passed for a whole new year!
Truck was just serviced, greased and vehicle inspected!
2020 Wacker Neuson E3000 Ground Heater w/ Generator
2020 Wacker Neuson E3000
Hours:1,083.2
Diesel Fired
385,000 BTU’s
2” Ball
Onboard 6Kw Kohler Diesel Generator
-Hours: 1,109.5
-Fully enclosed
-Powers machine to make it useable on any jobsite
Dual rear hose set up
One pump per hose loop means delivery of maximum Btu’s per hour.
Engineered for reliable performance and trouble-free starts
up to 140 hours of run time
the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.
The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Unit is fully functional and has just been serviced!
Recent Comments