2021 Heat Wagon VG1000 1MIL BTU Indirect Fired Portable Heater
2021 Heat Wagon VG1000
LP or Natural Gas Capable
Input: 1,000,000 BTU/Hr
Gas Consumption 11 GPH Propane/1000 CFH NG
Gas Connection 1-1/4” FNPT
Electrical: 240 Volts
Fan: 4,075 CFM 2.0” SP
Max Temp: 200°F
Remote Thermostat Controlled
Indoor/Outdoor
Clean Dry Heat
Duct size: 20″ diameter
Ductable to 200′
Transport Weight: 1,500lbs
Transport Dimensions: 120”x32”x55”
-Stock# P1458
-Powered by Yanmar Turbo Diesel engine
-72HP 217lbs torque
-Hour meter- 3.6
-2 speed transmission with hydraglide
-Unladen weight: 8415Lbs
-Rated operating capacity 2300lbs
-Rated Operating capacity @ 50% tipping load 3286
-Rated operating capacity with counterweights 2400lbs
-Operating weight 9251lbs
-Overall Dimensions: 12’5’x ”6.2”x6’9” (Length with bucket)
-Fully Raised Operating Height: 13’2”
-Height to Hinge Pin – Fully Raised: 10’1”
-Standard flow rate 23gpm @ 3475 PSI
-High flow Aux hydraulics 30gpm @ 3325 PSI
-Pilot hydraulic control
-Enclosed cab w/ AC and heat
-Switchable self-leveling
-Power-a-tach hydraulic attachment system
-IdealTrax system – automatic track tensioning IdealTrax example
-Bluetooth connect radio
-High back vinyl air suspension seat
-4 season camoplast SD tracks
-72” 20.6 cu ft bucket with cutting edge
-Side mounted counterweights
-Telematics easy link connection (Gives you locations/service intervals/info about the machine anywhere in the world!)
-Machine comes with factory 2,000 Hour/2 Year Warranty (Whichever comes first)! We offer extended warranty plans!
We take trade ins! Trade in your old equipment for added deals!
For more information or to schedule a demo please call us at 603-417-2112
Finance Monthly Payments for Qualified Customers (Subject to Approvals)
0% 36 months – $2045.00
0% -36 months $10,000 down – $1767.00
1.99% 48 months – $1597.00
1.99% 48 months $10,000 down – $1380.00
2.99% 60 months – $1322.00
2.99% 60 months $10,000 down – $1,119.00
3.75% 72 months – $1125.00
3.75% 72 months $10,000 down – $966.00
Powered by: DC Electric Motor (Batteries)
42′ Platform Height / 48′6” Work Height / 25’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
Electric Power to the Platform
Working Width: 12’ 6”
Basket Width: 4’ 7”
Minimum Weight: 3,990lbs
Overall Dimensions: (LxWxH) 18’3″x5’3″x6′7″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
Optional Upgrades:
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2019 International 4300 Altec Material Handler Bucket Truck
2019 International 4300
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 73,536 Miles
4×2
WB: 193”
GVWR: 33,000lbs
Locking Diff
Air Brakes
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
CHECK OUT OUR FULL WALK AROUND AND OPERATION VIDEO OF THIS TRUCK BELOW!
2024 Manitou MT 733 Easy 75D Comfort Enclosed Telehandler Fork Truck
2024 Manitou MT 625 ST
Powered by: Deutz TD 3.6L Turbo Diesel
75hp/240lb torque
Hour Meter Reads: 4.3
Hydrostatic Transmission
-Number of Gears: (4 Forward / 4 Reverse)
4WD
3-way steering (Crab Steer, front steer, side walk steer)
Max Lift Capacity: 7,275 lbs
Max Lift Height: 22′ 6″
Max Outreach: 12′ 8″
Breakout Force: 12,971 LB Force (Can be used as a loader)
Operating Weight: 15,100 lbs
Unit is being sold with 46“ Forks and a 42“ Powershift Mast
(Many other attachments offered! We can get you any attachment you’d like!)
Hydraulic QD
Aux Hydraulic Ports at the tip of boom
Comfort Ride Control
Working Lights
Enclosed Cab
Heat + AC
Alliance Tubeless Tough Trac 400/80-24 Tires
Telematics easy link connection (Gives you locations/service intervals/info about the machine anywhere in the world!)
Overall Dimensions: 16’2”x7’7”x7’9” (Length to face of Mast)
Machine comes with factory 2,000 Hour/2 Year Warranty(Whichever comes first)! We offer extended warranty plans!
2015 Ford F750 Altec Forestry Bucket Truck
2015 Ford F750
6.7L Cummins ISB Turbo Diesel
6 Speed Transmission
Odometer reads: 44,215 Miles
PTO Hours: 3,486 Hours
4×2
WB: 194”
33,000 GVWR
Hydraulic Brakes
Pintle Hitch
Bench Seat
Heat
Cab Brush Guard
Strobe Lights
11’ Chipper Dump Bed
Good Tires all around
Equipped with the following:
Altec LR756 Boom
56’ Platform Height, 61’ Working Height
Double Over Center Boom
Single Man Basket
Rated for 400lbs
Two set of Hydraulic Tool outlets at platform
Boom is insulated and rated for 46kv
Continuous Rotation
2 Outriggers
Upper and Lower Controls
Lever Lowers
Pistol Grip Uppers
Emergency stop valve at Upper and Lower Controls
Altec Boom will come ANSI/Dielectrically Tested!
Truck will come Serviced, Greased, and Vehicle Inspected!
2013 Ford F750 Altec Forestry Bucket Truck
2013 Ford F750
6.7L Cummins ISB Turbo Diesel
6 Speed Transmission
Odometer reads: 59,901 Miles
PTO Hours: 6,586
4×2
WB: 194”
33,000 GVWR
Hydraulic Brakes
Pintle Hitch
Bench Seat
Heat
Cab Brush Guard
Strobe Lights
11’ Chipper Dump Bed
Good Tires all around
Equipped with the following:
Altec LR756 Boom
56’ Platform Height, 61’ Working Height
Double Over Center Boom
Single Man Basket
Rated for 400lbs
Two set of Hydraulic Tool outlets at platform
Boom is insulated and rated for 46kv
Continuous Rotation
2 Outriggers
Upper and Lower Controls
Lever Lowers
Pistol Grip Uppers
Emergency stop valve at Upper and Lower Controls
Altec Boom will come ANSI/Dielectrically Tested!
Truck will come Serviced, Greased, and Vehicle Inspected!
2014 Ponsse Ergo 8W Harvester with H7 Processor Head
2014 Ponsse Ergo 8W Processor
Powered by Mercedes OM906LA Turbo Diesel
-275hp/811lbs torque
Hours: 15,668
Hydrostatic-Mechanical Powered
C5 Crane
H7 Processor Head
Max Reach w/ Head: 32’ 9”
Comes with two tire chain sets (Were on the front tires)
Operating Weight: 45,100lbs
24V System
Fuel Capacity: 105.7 gallons
Hydraulic Fluid Capacity: 92.5 Gallons
Enclosed Operating Cab
AC + Heat
Radio
Full Computer System for tracking processing
Dimensions: 26’7”(Folded)x9’4”x12’4”
repairs completed: Main Boom Piston Repack, Left steer piston repack, Tons of Hydraulic lines, Hydraulic gear pumps resealed, new head attachment breaking system, new Bar on Saw
Good Tires all around
Just serviced and greased!
2011 Freightliner M2 112 Terex Texoma Pressure Digger Truck
2011 Freightliner M2 112
MBE 4067MT7E Turbo Diesel
-450HP
Eaton 8LL Transmission
Odometer reads: 25,809 Miles
6×4
WB: 190”
-Exhaust Brake
-Rear PDL Locker
-Rear Diff Lock
GVWR: 60,000lbs
A.C. and Heat
AM/FM Radio
Air Brakes
Tandem Axle
Driver + Passenger Seats
Good tires all around
Equipped with the following:
Terex Texoma 650 Pressure Digger Drill
John Deere 4 Cylinder Diesel Engine
-155hp
Hours on Unit: 1,986 Hours
Digging Depth: up to 40′ (13.3M)
Kelly Bar – 2 Bar Telescopic System 5” Outer x 4” Inner Bar
Hydrostatic Drive with High / Low Range
240° Degree Turntable Rotation
24” Extendable Frame Travel
25,700lb, Hydraulic Crowed Force
43,000 ft-lb Rotary Torque
Max Auger Size: 72″
Service Winch – Mast Mounted 5K lb. Rate Capacity
Joystick Controls – Main Drill Functions
Constant Crowd/Drill Rotation Controls to Match Toughest Drilling Conditions
Onboard 50 Gallon Water Tank
50 Gallon Fuel Capacity
100 Gallon Hydraulic Reservoir
Front & Rear Hydraulic A-frame Outriggers
Truck was Serviced, Greased and Vehicle Inspected!
Terex Unit/John Deere Engine was Serviced and Greased!
-Powered by Yanmar Turbo diesel engine
-72HP 217lbs torque
-Hour meter- 5.3
-2 speed transmission with hydraglide
-Unladen weight: 7553Lbs
-Rated Operating Capacity @ 50% tipping load 2750lbs
-Tipping capacity 5501lbs
-Operating weight 8320lbs
-Overall Dimensions: 12’5’x ”5’8”x6’9” (Length with bucket)
-Fully Raised Operating Height: 13’9”
-Height to Hinge Pin – Fully Raised: 10’7”
-Standard flow rate 26gpm @ 3475 PSI
-High flow Aux hydraulics 33gpm @ 3325 PSI
-Pilot hydraulic control
-Enclosed cab w/ AC and heat
-Switchable self-leveling
-14 pin aux attachment connector
-Power-a-tach hydraulic attachment system
-Bluetooth connect radio
-Reverse camera
-Deluxe high back cloth air suspension seat with heat
-14×17.5 14ply HD tires
-72” 19.4 cu ft bucket with cutting edge
-Telematics easy link connection (Gives you locations/service intervals/info about the machine anywhere in the world!)
-Machine comes with factory 2,000 Hour/2 Year Warranty (Whichever comes first)! We offer extended warranty plans!
We take trade ins! Trade in your old equipment for added deals!
For more information or to schedule a demo please call us at 603-417-2112
Finance Monthly Payments for Qualified Customers (Subject to Approvals)
0% 36 months – $2012.00
0% -36 months $10,000 down – $1735.00
1.99% 48 months – $1572.00
1.99% 48 months $10,000 down – $1354.00
2.99% 60 months – $1302.00
2.99% 60 months $10,000 down – $1,121.00
3.75% 72 months – $1125.00
3.75% 72 months $10,000 down – $969.00
Recent Comments